Product Details - Acousti Products AcoustiFeet Soft Silicone Anti-Vibration Feet - Black up to 30 lbs. (4-pack)
*** If you are a reseller or a system builder we have OEM AcoustiFeet available in packs of 128, enough for 32 cases! Contact us for more information. ***
Anti-vibration Replacement Silicone PC Case Feet
A great deal of PC case feet are solid plastic, or (at best) very hard rubber
and therefore do a good job of transmitting unwanted vibrations from inside
a PC via the chassis/case into the desk, floor or shelf on which the system
sits. In this situation, where the case is in direct contact with the substrate,
the PC can generate annoying noise elsewhere (secondary noise).
AcoustiProducts™ has designed a unique set of 4 self-adhesive soft silicone
feet, of varying softness (for different case weights) and in two colours.
These case feet are designed to decouple a PC case from the floor or substrate
by absorbing vibrational energy, and therefore helping to minimise noise generation
caused by vibrations.
A little extreme? Well, yes, perhaps: but even with very quietest PCs it
is vibration that becomes the most significant culprit/contributor
to noise generation. So we have developed these case feet to try and minimise
vibrations in our pursuit of 'ultimate noise reduction'. We hope you enjoy
the difference - check out the feedback & reviews from customers below!
Available in 2 Different Colours:
Available in 4 Different Softnesses:
Suitable Applications for Case Feet |
Max.
Load* |
Product Code
(Pack of 4) |
Colour |
Softness |
Light weight PC & SFF PC cases, HTPC
cases, vibrating HiFi units, TV and home cable set top boxes, small speaker
cabinets, inkjet printers etc.
|
8Kg
(18 lb) |
ACF3007-15C |
Clear/Translucent |
Shore A 15° |
| ACF3007-15B |
Matt Black |
Shore A 15° |
Medium-to-light weight PCs, solid SFF
cases, heavy HTPC cases, larger inkjet printers and laser printers, heavier
HiFi units (such as power amps), speaker cabinets etc.
|
14Kg
(30 lb) |
ACF3007-20C |
Clear/Translucent |
Shore A 20° |
| ACF3007-20B |
Matt Black |
Shore A 20° |
| Medium-to-heavy weight PC cases (suitable for the
majority of PCs), larger Macs (like the G5), large laser printers,
large speaker cabinets etc. |
22Kg
(50 lb) |
ACF3007-25C |
Clear/Translucent |
Shore A 25° |
| ACF3007-25B |
Matt Black |
Shore A 25° |
| Seriously heavy PCs and Tower Server cases -
heavier PCs with multiple HDDs, tower-style case servers, other applications
like noisy photocopiers and office equipment etc. |
30Kg
(70 lb) |
ACF3007-30C |
Clear/Translucent |
Shore A 30° |
| ACF3007-30B |
Matt Black |
Shore A 30° |
| *The max load is the 'maximum optimal load' where compression
still occurs in the feet. The feet can carry higher loads, but they become
over-compressed, and suffer a reduced vibration-absorbing capacity if
overloaded. |
Foot
Specifications:
- Pack Weight: 22g (approx)
- Foot Height: 7.0mm ±0.25
- Foot Diameter: 29.5mm ±0.25
- Material: Silicone Rubber - varying softness, Translucent or Black
- Non-marking, and not sticky.
A simple and economic solution to combat unwanted vibrational noise! - throw
away your plastic feet and apply a set of 4 self-adhesive soft silicone case
feet!
These feet are also low-profile (7mm high), so they won't necessarily be
seen. The rounded edge is designed specifically to dampen vibration transmission
in a number of planes, and for varying case weights (see right).
Multiple Applications
Antivibration case feet are not just limited to combating PC noise and for
vibration control in their application - they may be useful for Inkjet
and Laser Printers, HiFi Separates, TVs,
Small Form Factor PCs, Home Theatre PCs,
and any number of appliances and enclosures that would benefit from vibration
adsorption and reduction. Speaker cabinets may also be a useful application
for these feet - helping to isolate the speaker cabinet from the surface on
which it sits.
OEM bulk packaging is available - call for
information toll free: (877) 205-2020
Buy Online
