A premium quality 770W quiet PSU equipped with a heat-pipe design for stable and silent operation.
Move
Zalman ZM770-XT PSU.
Zalman ZM770-XT Power Supply Unit.
Zalman ZM770-XT Quiet PSU.
Zalman ZM770-XT Near Silent Power Supply Unit.
Power Supply Unit Features
- Ultra Quiet 140mm fan coupled to heatpipe cooling system
- Solid capacitors and gold-plated terminals for maximized stability
- Flexible modular cable arrangement with EZ-Grip connectors
- 88% maximum efficiency - 80 PLUS Bronze Certified
- Four Independent +12VDC Rails (VGA x2, Motherboard, CPU)
- NVIDIA SLI and ATI CrossFire Ready
- Heat-pipe installed for maximum cooling performance and ultra quiet operation
- Wafer Bridge for reinforced cooling performance
- Supports ATX12V CPU 4-Pin and EPS12V CPU 8-Pin
- Multiple Safety Features for the Highest Level of Safety (Over-Voltage Protection, Over-Current Protection, Short-Circuit Protection, Under-Voltage Protection, and Over-Temperature Protection )
- Blue LED's are installed inside the power supply for cool aesthetics.
PSU Specification
| Zalman ZM770-XT PSU Specification |
| PSU: | ZM770-XT | ZM770-XT |
| +3.3V max load | 35 A |
| +5V max load | 35 A |
| +12V1 max load | 22 A |
| +12V2 max load | 22 A |
| +12V3 max load | 22 A |
| +12V4 max load | 22 A |
| Combined maximum output +3.3V / +5V | 155 W | 160 W |
| -12V max load | 0.8A |
| +5VSB maximum standby current | 3.5 A |
| PFC Type | Active PFC |
| Power Factor | 99% max |
| Power conversion efficiency | 88% max @ 230 VAC |
| Number of hard drive connectors | 6 |
| SATA connectors | 12 |
| Number of floppy drive connectors | 2 |
| Dimensions, mm | 180(L) x 150(W) x 86(H) |
| ATX12V (4-pin)/EPS12V (8-pin support | Yes, splitter |
| 20/24-pin ATX connector | No, 24-pin only |
| PCI-E support | One 6-pin and one 8/6-pin |
| Mains input voltage | 100-240 VAC, 50-60 Hz |
| Fan speed control | Thermal |
| Over voltage protection | Yes |
| Over current protection | Yes |
| Short circuit protection | Yes |
| Over temperature protection | Yes |
| Under voltage protection | Yes |
| EMC, safety approvals | CE, CB, RU, MIC, FC |
| Mains input voltage selection | Auto-range |
| Length of motherboard power cable | 55 cm (approx) |
For more specification details on the Zalman ZM770-XT PSU please go to the Zalman website.
Additional Information
Active PFC for Improved Power Factor & Reduced Harmonics
By implementing Active PFC(Power Factor Correction), instead of Passive PFC with a Power Factor(PF) of 75%, the PF is improved up to 99% while harmful harmonic frequencies are reduced to meet the Line Harmonic Distortion Requirement of EC61000-3-2 Class D.
WEEE & RoHS
Complies with WEEE & RoHS environmental directives of the European Union.
- WEEE (Waste Electrical and Electronic Equipment)
- RoHS (Restriction of Hazardous Substances)
 |
This power supply is 80 PLUS® Bronze certified with
82% minimum / 88% maximum efficiency (230VAC, Typical Load)
incorporating a high switching frequency & low power-loss
circuitry design, and guarantees higher efficiency compared
to uncertified products.
80 PLUS® is an energy efficiency certification program administered by Ecos Consulting of the U.S.A |
PSU Components
| Components |
 |
- 1 x Power Supply
- 1 x PCI-E2(6+2pin) Cable
- 2 x ODD/HDD Cables
- 4 x S-ATA Cables
- 1 x FDD Cable
- 1 x Fan Dual-Connector (ZM-DC1)
- 7 x User's Manual
- 5 x Cable Ties
- 4 x PSU Installation Screws
- 1 x AC Power Cord (not included in certain countries)
|
PSU Reviews
| Zalman ZM770-XT Reviews |
The Power Supply is high quality, no question about it. The sleek silver finish looks great and all the cables are nicely sleeved with rubber ends to keep them tidy. Moreover, in testing all of the rails were incredibly tight which makes for a very stable unit. Read the full review at xsreviews.co.uk |
 |
Cautionary Notes
1. Plugging the main power connector P1 into the motherboard while the product is connected to the AC power source may result in damage to the motherboard.
2. Make sure that the connectors are connected to their designated locations, and that the connectors are not oriented in the wrong direction when connecting the DC output connectors.
3. If the Power On light fails to light up when the main power button is pressed after completing the installation procedure, then some devices may be plugged in incorrectly or the motherboard may be faulty.