Scythe Fuma 2
* Will ship beginning Jan. 7, 2021.
The Fuma 2 follows the design principle of its predecessor and offers a powerful twin-tower radiator with a completely revised, asymmetrical design. Six high-quality 6 mm heatpipes connect the two heatsinks to the solid copper baseplate. All copper parts were lavishly nickel plated. The asymmetric orientation and a recess on the back of the second cooling-block allow unrestricted use of all memory banks. The Fuma 2 comes with two PWM fans from the popular Kaze Flex series. In addition to a regular model, a new slim version with a frame width of 15 mm is also used. The Fuma 2 uses the principle of the "Dual Fan Reverse Airflow" design, in which the fans rotate in opposite directions. This creates a higher static pressure and an increased and more stable air flow. To further maximize cooling performance, an additional fan can be mounted. The required mounting brackets are included.
Scythe Fuma 2 CPU Cooler Features
The classic twin-tower design of the Fuma 2 is not centered directly above the CPU socket, but offset by inclined heatpipes. This asymmetrical design provides maximum space for the memory banks. Also the cooling fins of the second tower are aligned in such a way that even memory banks on both sides of the CPU socket can be operated without problems, without restricting the effectiveness of the heat sink. Despite the enormous cooling surface of the Fuma 2 remains at a height of 154.5 mm and fits into any standard PC case.
- Dual Fan Reverse Airflow
The Fuma 2 CPU cooler comes with two fans, a Kaze Flex 120 and a Kaze Flex Slim 120, which rotate in opposite directions. This creates a higher static pressure and an increased and more stable air flow. Furthermore a third fan can be mounted for extra power. Additional fan brackets are included.
- Kaze Flex Flans
Both the regular model as well as the Kaze Flex Slim fan use a sealed fluid dynamic bearing (Sealed Precision FDB) that reduces friction and wear to a minimum thanks to a special oil film. Rubberized bearing surfaces have a decoupling effect and prevent the transmission of noise and vibrations.
- H.P.M.S. III (Hyper Precision Mounting System III)
The Fuma 2 CPU cooler uses the proven H.P.M.S III mounting system. A pre-assembled mounting bar with spring-loaded screws ensures balanced pressure distribution. During the installation, the adaptable backplate is securely held to the mainboard by rubberized spacers, making the process considerably easier. The mounting system offers full compatibility with all current sockets including AMD's AM4 and Intel's LGA 2066.
|Scythe Fuma 2 CPU Cooler Specifications|
|Model Name:||Fuma 2|
|Intel® Compatibility:||Socket LGA775
Socket LGA2011 (v3)
|AMD® Compatibility||Socket AM2
Please note that an original backplate with screw mounting is needed for installation on mainboards with AMD sockets. Please check before buying if the back plate is fixed by screws. If the backplate uses plastic pins, mounting of this cooler is not possible.
|Dimensions:||137 x 131 x 154.5 mm (including fan)|
|Weight Including Fan:||1.000 g / 33.8 oz.|
|Accessory:||Installation material for Intel™ and AMD™ Socket, thermal grease, fans, fan clips, installation manual, Y-PWM-cable, screwdriver|
|Material of Base Plate:||Nickel-plated copper|
|Fan Specifications (2 Fans)|
|Model Name:||Kaze Flex 120 Slim PWM (Fan 1)
Kaze Flex 120 PWM (Fan 2)
|Fan Dimensions:||120 x 120 x 17 mm
120 x 120 x 27 mm
|Fan Dimensions:||12.7 ~ 23.9 dBA
4.0 ~ 24.9 dBA
|Air Flow:||8.28 ~ 33.86 CFM - 18.40 ~ 75.24 m³/h
16.6 ~ 51.17 CFM - 36.89 ~ 113.71 m³/h
|Fan Speed:||300 (±200 rpm) ~ 1.200 rpm (±10%) (PWM-controlled)|
|Static Pressure:||2.26 ~ 8.83 Pa / 0.23 ~ 0.9 mmH²O
0.75 ~ 10.3 Pa / 0.762 ~ 1.05 mmH²O
|Bearing Type:||Sealed Precision FDB|