Scythe Fuma 2 Rev.B
* In stock.
The Fuma 2 follows the design principle of its predecessor and offers a powerful twin-tower radiator with a completely revised, asymmetrical design. Six high-quality 6 mm heatpipes connect the two heatsinks to the solid copper baseplate. All copper parts were lavishly nickel plated. The asymmetric orientation and a recess on the back of the second cooling-block allow unrestricted use of all memory banks. The Fuma 2 comes with two PWM fans from the popular Kaze Flex series. In addition to a regular model, a new slim version with a frame width of 15 mm is also used. The Fuma 2 uses the principle of the "Dual Fan Reverse Airflow" design, in which the fans rotate in opposite directions. This creates a higher static pressure and an increased and more stable air flow. To further maximize cooling performance, an additional fan can be mounted. The required mounting brackets are included.
Features
- Asymmetrical Twin-Tower-Design
The classic twin-tower design of the Fuma 2 is not centered directly above the CPU socket, but offset by inclined heatpipes. This asymmetrical design provides maximum space for the memory banks. Also the cooling fins of the second tower are aligned in such a way that even memory banks on both sides of the CPU socket can be operated without problems, without restricting the effectiveness of the heat sink. Despite the enormous cooling surface of the Fuma 2 remains at a height of 154.5 mm and fits into any standard PC case. - Dual Fan Reverse Airflow
The Fuma 2 Rev.B CPU cooler comes with two fans, a Kaze Flex 120 II Slim PWM and a Kaze Flex II120 PWM, which rotate in opposite directions. This creates a higher static pressure and an increased and more stable air flow. Furthermore a third fan can be mounted to maximize cooling performance. - Kaze Flex II Flans
Both the regular model as well as the Kaze Flex II Slim fan use a sealed fluid dynamic bearing (Sealed Precision FDB) that reduces friction and wear to a minimum thanks to a special oil film. Rubberized bearing surfaces have a decoupling effect and prevent the transmission of noise and vibrations. - H.P.M.S. IV (Hyper Precision Mounting System IV)
The Fuma 2 Rev.B CPU cooler uses the Scythe easy-to-install H.P.M.S. IV mounting system presents more optimal contact pressure to the latest CPUs on the market and provides full Intel LGA 1700 suppport.
Specifications | |
---|---|
Model Name: | Fuma 2 REV.B |
Model Number: | SCFM-2100 |
Intel® Compatibility: | Socket LGA1700 Socket LGA1200 Socket LGA115x Socket LGA2066 Square ILM / 2011-V3 Square ILM |
AMD® Compatibility | Socket AM4 |
Dimensions: | 137W x 129D x 154.5H mm (including fan) |
Weight Including Fan: | 1.000 g / 33.8 oz. |
Fan Specifications (Fan 1) | |
---|---|
Model Name: | Kaze Flex 120 II Slim PWM 1500 RPM |
Fan Dimensions: | 120 x 120 x 15 mm (including Anti-Vibration Rubber |
Fan Noise: | 2.58 ~ 23.80 dBA |
Air Flow: | 8.16 ~ 39.44 CFM - 18.40 ~ 75.24 m³/h |
Fan Speed: | 300 (±200 rpm) ~ 1500 rpm (±10%) (PWM controlled) |
Static Pressure: | 2.26 ~ 8.83 Pa / 0.23 ~ 0.9 mmH²O |
Bearing Type: | Sealed Precision FDB |
Voltage: | 2.16 W |
Amperage: | 0.18 A |
Fan Specifications (Fan 2) | |
---|---|
Model Name: | Kaze Flex 120 II PWM 1500 RPM |
Fan Dimensions: | 120 x 120 x 26 mm (including Anti-Vibration Rubber |
Fan Noise: | 4.00 ~ 24.60 dBA |
Air Flow: | 16.90 ~ 67.62 CFM - 36.89 ~ 113.71 m³/h |
Fan Speed: | 300 (±200 rpm) ~ 1500 rpm (±10%) (PWM controlled) |
Static Pressure: | 0.75 ~ 10.3 Pa / 0.762 ~ 1.05 mmH²O |
Bearing Type: | Sealed Precision FDB |
Voltage: | 1.56 W |
Amperage: | 0.13 A |