Other products by Zalman
Item #: ZMMFC3
Reg. Price: $39.99
Our Price: $39.99
Quantity:
 

Description 

The Zalman ZM-MFC3 fan speed controller uses a real time power load display unit to keep you fully updated on your computer's current statistics. The Zalman ZM-MFC3 uses a FSTN display for wide viewing angles allowing the display to always be clear and even.

The ZM-MFC3 has the capacity for temperature monitoring of up to 4 components of your choice.
The display shows: Fan RPM monitoring & control (3 x voltage, 1 x PWM), timer display and a built-in protection circuit & alarm.

 
Hide Thumbs First Previous Pause Next Last
Slideshow speed: 5 seconds
 
Move
Image shows the Zalman ZM-MFC3 fan speed controller.
  • Image shows the Zalman ZM-MFC3 quiet fan speed adjuster.
    Zalman ZM-MFC3 quiet fan speed adjuster.
  • Image shows the Zalman ZMMFC3 near silent fan speed manager.
    Zalman ZM-MFC3 near silent fan speed manager.
  • Image shows the Zalman ZM-MFC 3 quiet 4x fan speed monitor.
    Zalman ZM-MFC 3 quiet 4x fan speed monitor.
  • Image shows the Zalman MFC 3 fan speed regulator.
    Zalman MFC 3 fan speed regulator.
  • Image shows the Zalman ZM-MFC3 fan speed changer.
    Zalman ZM-MFC3 fan speed changer.

 
 

Fan Speed Controller Specifications

Zalman ZM-MFC3 Fan Controller Specifications
Dimensions 147(L) x 87(W) x 42(H) mm
Power & Temperature Display 10~999W / -9.9 °C ~ +99.9 °C
Fan Compatibility 1 x 4-Pin (Supports fans with PWM function)
3 x 3-Pin (Supports fans with RPM output function)
Fan RPM Control PWM Regulation Method (Fan PWM)
Voltage Control Method (Fan No.1~3)
Output Current MAX 0.7A
Output Voltage +4~11VDC
Input Voltage +12VDC / +5VDC

Zalman ZM-MFC3 Front Panel

Image shows the Zalman ZM-MCF3 real time fan speed contoller face.

Zalman ZM-MFC3 real time fan speed controller.

  1. Power Load Meter: Displays Power Load between 10 ~ 999W. Readings of 1 ~ 9W are shown as "Lo" and readings of 1000W+ are shown as "Hi".
  2. Timer: Timer shows Computer usage time and resets when Computer is turned OFF.
  3. RPM Display: RPM is displayed in units of 10RPM. Values of 200RPM and below are shown as "0". Values between 201 ~ 6000RPM are supported by the display.
  4. Temperature Display: Displays temperatures between -9°C and 99C. Temperatures below -10°C are shown as "Lo". The Display will blink temperatures between 80 ~ 99.9°C and display "Hi" for temperatures above 99.9°C.
  5. Fan Channel Display.
  6. Jog Wheel: Jog Wheel is used for adjusting Fan RPM and selecting a Fan Channel. RPM can be set from 60 to 6000RPM in units of 60RPM.

Zalman ZM-MFC3 Back

Image shows the Zalman ZM-MCF3 real time fan speed contoller face.

Zalman ZM-MFC3 real time fan speed controller panel back.

  1. Standard Fans (Fan 1~3): 3-Pin fans that support the RPM output function can be connected for use. PWM Fan : A 4-Pin fan that supports the PWM function can be connected for use.
  2. Temperature Sensor: Four temperature sensors can be connected.
  3. CVS Terminal: Receives the measured values of the CVS.
  4. Power Connector: Connects with the PSU's 4-Pin connector.

Fan Controller Components

Image sows the Zalman ZM-MFC3 Components for quiet fan seed regulators.
  • One ZM-MFC3
  • One CVS (Ampere/Voltage Sensor)
  • One CVS Extension Bracket
  • One Temperature Sensors
  • One C3 Cable
  • One Y Cable
  • One 4-Pin Cable
  • One 3-Pin Cable
  • One Bracket Screw
  • Four ZM-MFC3 Installation Screw
  • One User's Manual

Fan Speed Regulator Reviews

Zalman Fan Speed Controller Reviews
A video review is available from metacafe.com. Image shows video review of the Zalman ZM-MFC 3 by Metacafe.com.

Cautionary Notes

Plugging in the CVS Cable of the CVS into the motherboard’s USB port may damage the motherboard and CVS.

If the current to be measured exceeds 10A (RMS), use a cable or conductor that allows current greater than the current to be measured to flow through it, and always connect protective grounding prior to use of this instrument.